Dock Hardware

Clipper holding clips are non-conductive, non-magnetic and non-corrosive. Ideal for storing boat hooks, mops, gaffs, flashlights, tools and a variety of accessories. Many uses for house a...

1/8 in. hot dipped galvanized steel with 7/16 in. holes for 3/8 in. bolts.

Comes in a pack of 8 Lag bolts used for securing floating docks Use with Dock Edge + Inc. floating dock hardware

mounts on the inside corner of framework. all stationary dock hardware is hot dipped galvanized steel.

When you purchase Dock Edge products, you are investing in quality marine products that are durable and reliable. Each product is manufactured with a commitment and dedication to superior workmanship...

used as footing. may be bolted to a 2" x 6" piece of lumber and joined to an adjacent base plate for stability. all stationary dock hardware is hot dipped...

Made of 1/8" (nominal) hot-dip galvanized steel with 7/16" holes to accommodate 3/8" bolts. Hinge used to easily connect sections of the dock. It also makes it possible...

used on inside corners for increased strength. all stationary dock hardware is hot dipped galvanized steel

Galvanized T connector hinge kit including 1 male part, 1 female part and connecting pin. Measure 3-1/2’’ x 5’’.

used when attaching an dei89-101-f leg brace from corner to inside leg for stability. all stationary dock hardware is hot dipped galvanized steel

* prevents from compressing into the wood resulting in dock sliding down the leg pipe. also prevents bolts from working into the wood and the lock washers working loose. *...

neue",="" helvetica,="" arial,="" sans-serif;="" background-color:="" rgb(255,="" 255,="" 255);"="" Use to cover raw leg pipe edges. Gives dock the finishing touch. Marine grade PVC Mol...

for lighter duty applications where an outside corner is not necessary. all stationary dock hardware is hot dipped galvanized steel.

use with leg brace kit dei89-101-f. all stationary dock hardware is hot dipped galvanized steel.

galvalume™ leg pipe 10' is corrosion resistent with is aluminium-zinc coat.

used to sandwich wood framing when another piece of hardware isn't used.prevent bolt loosening or pull-thru. all stationary dock hardware is hot dipped galvanized steel.

patte galvalume 6'8"

use for soft bottom applications. allows the pipe to extend through to lake bed for lateral support. pointed corners. all stationary dock hardware is hot dipped galvanized steel.

Rugged Cast Iron Auger fits up to 2" OD pipeand easily penetrates sandy or soft sediment as well as packed surfaces Ideal for locations where it may be necessary...

joist corner used to reinforce stringer joints. all stationary dock hardware is hot dipped galvanized steel.

used to join male and female connectors.

pin, 6-5/8" long, 1/2" rod, for 86-103-f

engineered for use with our howell™ and dockedge+ dock floats.

Inside Corner. Use to mount stringers with 99-006-F washer plates. Also use as a backer plate to prevent cleats from pulling out.